A functioning furnace is an absolute necessity for surviving the winter in Alberta, so it’s important to know the signs that an old furnace is on its last legs. At R&D Plumbing and Heating, our experts can help you figure out when the time is right for Furnace Replacement, find the right furnace for your home, and make sure that it is safely and professionally installed.
Why Do Furnaces Need To Be Replaced?
The obvious answer to this question is that furnaces get old and break down like any other machine. However, age isn’t the only culprit. You might find that the furnace you have isn’t the proper size to heat your home, especially if you make a change to the area you heat by finishing a basement or adding a room. Another reason to replace a furnace is to get a more energy-efficient model.
What Are The Signs That It May Be Time To Replace A Furnace?
If you’re thinking about getting a new furnace, the first thing to consider is the age of the furnace you want to replace. Most modern furnaces can last anywhere from 20 to 30 years, and when a furnace is more than 15 years old, you’ll need to consider whether it’s worth spending money on a repair. The following are some signs that a furnace may need replacing:
The furnace is breaking down frequently. You could end up spending more money on repairs than you would spend on a new furnace.
The power bill is going up even though you’re heating your home as you normally do. Rising energy costs can indicate that a furnace is no longer working efficiently and is draining too much power.
Some rooms get warm while others stay cold. Uneven heating is one of the top signs that a furnace is reaching the end of its life.
The pilot light in a natural gas furnace is yellow instead of blue. A yellow flame isn’t as hot as a blue flame, meaning that the pilot light may not be burning off carbon monoxide but rather letting it leak into the house.
The outside of the furnace exhibits signs of wear and tear, like cracks or rust spots. These are signs of age that tend to correlate with a decrease in performance.
You start noticing more dust than usual, especially coming from the heating vents. If you’re changing the filter every few months and still seeing a lot of dust, it may be that the furnace is no longer able to clean the air properly.
What Type Of Furnace Is Right For Your Home?
When you’re buying a new gas furnace in Lloydminster, AB, you have several options to choose from, and it’s important to get the heating solution that’s right for your home and your needs. The most popular type of furnace in modern homes is a natural gas furnace, and it comes in three styles: single-stage, two-stage, and modulating. These styles differ in price, energy efficiency, and heating capacity. At R&D Plumbing and Heating, our HVAC experts will work with you to determine the best furnace for your home.
What Can You Expect When You Have A New Furnace Installed?
Installing a furnace is not a DIY project, but rather it requires the expertise of a certified HVAC technician. When a furnace burns natural gas, it produces deadly carbon monoxide that could leak into the home if the system isn’t perfectly sealed. Thus, any new installation begins with an inspection of all existing ductwork to check for any gaps.
The next step is to remove the old furnace and put the new one in place, connecting ductwork, gas and condensation lines, and wiring. Once the Furnace Installation is complete, technicians will test the system by running it through a full heating cycle and checking to make sure that all rooms are heated evenly. The process can take anywhere from four to eight hours.
About R&D Plumbing and Heating
R&D Plumbing and Heating is a locally owned and operated business that has been serving the Lloydminster area for more than 30 years. Our highly trained staff is here to assist you with your heating or plumbing needs.